EW2260
Overview · Pad B · East Webb
ESP
Critical
Live · updated 08:08:39
Oil rate (VFM)
308bbl/d
79% water cut
Liquid rate (VFM)
1,461bbl/d
Gas 405 Mcf/d
Frequency
53.8Hz
Setpoint 53.8 Hz
Motor current
41.4A
Alarm 45 A
Intake pressure
412psi
Minimum 350 psi
Motor temperature
247°F
Alarm 245 °F
Health
CriticalActive alarms
EventsOptimization
OpenFrequency
53.8 Hz → 51.0 Hz
Predicted change -31 bbl/d · nothing is applied until approved.
PlexPilot insight
AssistantWinding temperature has climbed for 10 days while flow stays inside the recommended range, which points to the motor rather than the process. Reducing to 51 Hz keeps it under the limit and buys time for a planned workover.
Live operation
Pump performance · live operating point
Head, power and efficiency vs. flow at 53.8 HzESP string
Surface VSD53.8 Hz
Discharge pressure1,925 psi
Pump · 280 stages3,518 ft
Intake pressure412 psi
Seal · protectorNormal
Motor temperature247 °F
Position in rangeInside range
Trends
Dashed line is the alarm or operating limitIntake pressure0 psi
Minimum 350 psi
Motor current0.0 A
Alarm 45 A
Motor temperature0 °F
Alarm 245 °F
Vibration0.00 g
Alarm 0.50 g
Production
Current oil
308bbl/d
VFM estimate
Potential oil
422bbl/d
Model estimate
Realization
73%
Current ÷ potential
Production gap
110bbl/d
3,300 bbl over 30 days
Actual vs potential · 7 days
● Actual ● PotentialWhere the gap comes from
110 bbl/dNot at optimal frequency22
Gas interference38
Low intake pressure33
Downtime and trips16
Losses are estimated by the optimization and diagnostics models.